ignition cycle

== ignition cycle (Englisch) == === Substantiv === Worttrennung: ig·ni·tion cy·cle, Plural: ig·ni·tion cy·cles Aussprache: IPA: […] Hörbeispiele: — Bedeutungen: [1] Technik: wiederkehrender Zeitpunkt, an welchem bei einem Hubkolbenmotor das Gasgemisch entzündet wird Herkunft: zusammengesetzt aus den Substantiven ignition → en und cycle → en Beispiele: [1] High-performance microcontrollers determine the ideal air/fuel mix for each ignition cycle. Hochleistungs-Mikrokontroller bestimmen das ideale Luft-Kraftstoff-Gemisch für jeden Zündzyklus. [1] “In hot-air and steam systems, the thermostat directly controls the starting and stopping of the ignition cycle.” [1] “The automobile engine efficiency is then the work (W) produced by the power stroke divided by the heat absorbed (QH) during the ignition cycle.” [1] “Knocking is the phenomenon in the cylinder of an internal combustion engine brought about by adhering glowing carbon deposits on the valve gear that are left from the ignition of the fuel of the previous ignition cycle (and not purged by the exhaust stroke).” [1] “More energy efficient lighting systems use high frequency electronic starter circuits which offer a more precise and controlled heating and ignition cycle.” [1] “During the combustion process, tetraethyllead is heated and dissociates to a lead atom (which is oxidized to lead oxide) and four ethyl radicals. These will quench any radicals formed too early (before the sparking plug has given the ignition spark) and thereby prevent self-ignition (knocking) at inappropriate times during the ignition cycle in a car.” ==== Übersetzungen ==== [1] linguee.de Quellen: